Additionally, percent solids were determined for sediment and marine biota samples by Method SM2540G. Alkylated PAHs were extracted by EPA 3550 and 3540 and analyzed by EPA 8270 using GC–MS-SIM. PAHs are reported as sums, usually mg/kg. (Data regarding reporting and detection limits are available upon request to the authors.) In a second set of analyses, investigations into sample identification and provenance included two levels of analytical procedures, as described by Hansen et al. (2007), OSINE, 2011 and CEN, 2012. Firstly, total extractable n-alkanes (C11–C60) were measured using GC-FID (EPA Method 3580/8000-GC-FID) for reference

samples, and pre-well-capping, post-well-capping, and post-Hurricane Isaac environmental samples. SB431542 concentration Secondly, concentrations of PAHs, alkylated PAHs, and biomarkers were measured using GS–MS. For water samples, PAHs and alkylated Ruxolitinib PAHs were measured using GS–MS EPA Method 3510/8270 ( US-EPA, 2007) and results were provided in μg/L. Mousse, tarballs, and aerosol samples were analyzed for PAHs and alkylated PAHs using GC–MS EPA Method 3540/8270 ( US-EPA, 2007), and results have been given in mg/kg. Water-saturated sediment was collected manually by snorkeling. A Ponar-type dredge sampler was used to collect sediment samples in waters >3 m deep. Sediment samples were

also collected from deep water from an area 50 km in diameter around the Macondo wellhead using a multiple corer. Samples were collected 2 months after the wellhead had been capped. Samples were frozen on shipboard and shipped to the laboratory for processing and analysis. Analyses of sediment and biota samples were performed by ALS Laboratory Group (C9936 67th Ave., NW, Edmonton, AB Canada T6E OPS). TPHs (C11–C60) were measured by GC-FID Scan and by

Method Reference EPA 3550/8000-GC-FID. Results were provided in mg/kg. PAHs and Alkylated PAHs were measured using Method Reference EPA 3540/8270 GC/MS. Those results were provided in mg/kg. Sediment samples were also analyzed at Pace Analytical, located in St Rose, Louisiana. Pace sediment samples were analyzed for PAHs and Alkylated Methocarbamol PAHs using gas chromatography/mass spectrometry (GC/MS) and Method Reference EPA 8015, modifications 6010, 7471, and 8260. Results were provided in mg/kg. For sediment and biota samples, the Reporting Limit (RL) changed repeatedly depending upon the amount (%) of solids present in the samples. These values are available for viewing upon request. Seawater samples were collected from just below the ocean surface using a Wildco vertical PVC sampler, and stored in Nalgene bottles, on ice, at <4 °C. All samples were processed by EPA-certified laboratories – Sherry Laboratories in Lafayette, LA; Hampton Clarke Veritech in Fairfield, NJ; ALS Laboratory Group, Edmonton, Alberta, Canada; and Pace Laboratory in St. Rose, LA, USA.