(1) equation(1) dCbdt=−3RpVsVlks(Cb−Cs)where Cb is the bulk and Cs the solid surface sugar concentrations. Vs was assumed to be the volume of adsorber immersed in a volume Vl of Palbociclib price liquid, ks is the film coefficient, within sugars are dissolved at an initial concentration C0, contained in a perfectly stirred reactor. The initial condition for Eq. (1) is: equation(2) t=0→Cb=C0t=0→Cb=C0 The differential material balance inside the solid particles, where adsorption takes place on the porous

surface is (Barboza et al., 2002 and Kalil et al., 2006): equation(3) ∂Ci∂t=Def(∂2Ci∂r2+2r∂Ci∂r)−(1−ɛp)ɛp∂qi∂t If one considers that equilibrium occurs at the surface: equation(4) ∂qi∂t=∂Ci∂t∂qi∂Ciand the equation can be reduced to: equation(5) [ɛp+(1−ɛp)∂qi∂Ci]∂Ci∂t=Def(∂2Ci∂r2+2r∂Ci∂r)

The initial and boundary conditions associated with the diffusion process inside the solid particles are, respectively: equation(6) t=0→Ci=qi=0t=0→Ci=qi=0 equation(7) r=R→∂Ci∂r=ksɛp·Def(Cb−Cs) equation(8) r=0→∂Ci∂r=0where Def is diffusion coefficient, qi is the sugar concentration adsorbed at specific site on the zeolite and ɛp is a zeolite porosity. After a preliminary screening MDV3100 solubility dmso amongst the isotherm models of Langmuir, Freudlich, linear and BET, it was verified that the Langmuir model was the most suitable to represent the adsorption of all sugars in this study. The adsorption equilibrium isotherm can be represented by the Langmuir model, according to Eq. (9): equation(9) qi=qmax·CikD+Ciwhere qmax is the maximum adsorption capacity and kD is the dissociation constant. The method of lines was used to solve the partial differential equation (Eq. (5)), which is a general procedure for the solution of time dependent partial differential C-X-C chemokine receptor type 7 (CXCR-7) equations. In this sense, the finite difference scheme was used to approximate the spatial derivatives

using equal size elements, resulting in a system of ordinary differential equations (ODE) composed of n equations inside the solid particle plus the differential mass equation in liquid phase (Eq. (1)). After this procedure, the system of ODE was solved using the LIMEX routine ( Deuflhard, Hairer, & Zugck, 1987), whose discretization is based on the elementary linearly implicit Euler. The model parameters, namely qm, kD, Def and ks were estimated using the Particle Swarm Optimization method (PSO), which has been provided satisfactory fitting of adsorption data ( Burkert et al., 2011 and Moraes et al., 2009). The estimation of the parameters consisted of minimizing the sum of the least squares (SSR) as described in Eq. (10): equation(10) SSR=∑i=1n=NPE(yi−yicalc)2where NPE is the number of experimental points used in the estimation, y is the vector of the experimental data points and ycalc is the vector calculated by the model.